Features of Cuttable Neon Flex LED Strip

1. Compact Luminous Profile for Clean Linear Lighting

The slim 6×12mm profile creates a clean, continuous line of light without taking up much installation space. It works well where a narrow lighting profile is needed for contours, decorative lines or auxiliary illumination. The 120° beam angle helps spread the light evenly across the visible surface for a softer and more consistent appearance.

2. Flexible Silicone for Bending and DIY Projects

The silicone body is soft and flexible enough to follow curves and simple custom shapes during installation. It can be bent around architectural details, display structures and decorative features without the rigid appearance of conventional linear fixtures. The flexible construction also makes it practical for DIY lighting projects and customized layouts.

3. 120 LEDs/m with Efficient 7.2W/m Output

Using SMD2835 LEDs at a density of 120 LEDs per meter, the strip delivers a consistent linear appearance while keeping power consumption at 7.2W/m. Depending on the selected color temperature, the listed luminous flux ranges from 237 to 266 lm/m, with lighting efficiency reaching up to 37 lm/W.

4. 12V and 24V Versions for Flexible System Design

Available in both DC12V and DC24V versions, this series gives installers more flexibility when matching the lighting to the existing power system. The 12V version is suitable for lower-voltage applications and shorter layouts, while the 24V option can be selected according to the requirements of the overall installation.

 

Cuttable Neon Flex LED Strip Dimensions(mm)

 

Cuttable Neon Flex LED Strip Wiring Diagram & Installation Guide

 

Installation Steps for Cuttable Neon Flex LED Strip

1. Measure and Cut the Strip
Measure the required installation length before cutting. Cut the neon flex LED strip only at the marked cutting line to avoid damaging the PCB and internal LED circuit.

2. Connect the Power Wires
Solder the red wire to the positive (+) terminal and the black wire to the negative (-) terminal on the PCB. Check the polarity before applying power to the silicone neon LED strip.

3. Seal the Open End
Apply a suitable amount of glue or sealant to the open end of the silicone tube. Install the matching end cap in the direction shown by the arrow and make sure the end is properly sealed.

4. Install the Mounting Clips
Prepare the screws and mounting clips, then position them along the planned lighting path. Adjust the clip placement before securing each one firmly with a screwdriver.

5. Fit the Strip into the Clips
Place the light-emitting side of the neon flex LED strip facing upward. Press the strip body fully into the mounting clips, keeping the strip surface parallel with the upper edge of each clip.

6. Connect and Protect the Terminals
Connect the installed LED strip to the correct power output. Insulate the terminals and exposed ends, then apply suitable short-circuit and anti-corrosion protection before putting the lighting system into operation.

 

Handling Precautions for Cuttable Neon Flex LED Strip

             

1. Do Not Bend the Strip Laterally
Do not bend the silicone neon LED strip in the lateral direction shown in the illustration. Bend it only along its intended direction and installation path to avoid putting stress on the internal circuit.

2. Do Not Twist the LED Strip
Do not twist, fold or rotate the neon flex LED strip during installation. Twisting can deform the silicone tube and place uneven pressure on the PCB, which may affect the strip’s appearance and electrical connections.

3. Do Not Wrap the Strip Around Objects Smaller Than 50 mm
Do not wrap the LED strip around an object with a diameter of less than 50 mm. Maintain a bending diameter of at least 50 mm to avoid excessive bending stress and help preserve the strip’s shape and performance.

 

Recommended Applications for Cuttable Neon Flex LED Strip

1. Hotel and Hospitality Lighting

The slim profile and soft linear output work well in hotels, guest areas, restaurants and other hospitality spaces where lighting needs to add atmosphere without becoming visually heavy. It can be used around architectural details, counters, wall features, display areas and other locations that benefit from a continuous decorative light line.

2. Bar, Restaurant and Commercial Decorative Lighting

The flexible construction makes it suitable for bars, restaurants and other commercial spaces that use lighting as part of the overall interior design. It can follow curved edges, decorative structures and selected architectural details to create a clean light line without the harder appearance of rigid fixtures.

3. Architectural Contour and Auxiliary Lighting

 

Packaging & Shipping Information for Cuttable Neon Flex LED Strip

Item No.	Qty Per Roll（m）	Qty Per Carton(m)	Total Weight(KG)		Dimension of outer carton（mm）
					Length	Width	Height
BS-FN62835A-X120 BS-FN62835C-X120	5	100	11		384	295	300
Accessories					1M Tube with 2pcs Clips + 2pcs end cap (Head and Tail)

 

Professional Cuttable Neon Flex LED Strip Manufacturer & Supplier

Founded in 2013, YESUN LED is a Shenzhen-based manufacturer specializing in LED signage and commercial lighting solutions. With 5,000㎡ of automated factory space, dedicated SMT lines, and strict full-process QC, we support OEM/ODM projects for customers in over 100 countries. To learn more about our team, factory, and production capabilities.

 

Product Certifications & Compliance

Our products comply with international standards including UL, ETL, CE, and RoHS certifications to support different market requirements.

Cuttable Neon Flex LED Strip Quality Control Process

We apply strict quality inspection standards throughout production to ensure stable performance and reliable quality before shipment.