Features of 6-LED AC110/220V High Voltage LED Sign Module
1. Direct AC110V/220V Mains Operation
he YS-MB8366/YS-MB8367 6-LED High Voltage Sign Module is designed to operate directly from mains voltage, supporting AC110V or AC220V according to the selected model. This high-voltage architecture can simplify the electrical design of large signage systems by removing the need for a conventional low-voltage DC power supply.
2. Six SMD3030 LEDs with 660–720lm Output
Each module integrates six SMD3030 LEDs and delivers approximately 660–720 lumens per module. The higher LED count provides stronger illumination from each individual lighting point, making it suitable for sign structures where a higher module output is preferred.
3. Up to 100lm/W Luminous Efficiency
The product reaches up to approximately 100lm/W luminous efficacy, offering a practical balance between brightness and electrical consumption. This is particularly useful for commercial signage systems that may operate for long periods and contain a large number of modules.
4. IP65 Protection for Signage Environments
The IP65 protection rating helps protect the module against dust and water exposure, making it suitable for indoor commercial signs as well as appropriately constructed outdoor advertising installations.
6-LED AC110/220V High Voltage LED Sign Module Dimensions
6-LED AC110/220V High Voltage LED Sign Module Typical Lighting Test Data
Built around our 6LEDs high Voltage Matrix LED Modules, the figures below show how spacing, module count and surface brightness shift as you adjust light box depth. These modules run on AC110V/220V with a 175° wide beam angle and IP65 rating, so the same layout logic holds up across indoor retail displays and outdoor storefront signs alike. Whether you're laying out a backlit airport sign, a subway light box or a slim retail display, matching DX/DY to box thickness keeps the face evenly lit without overloading it — thicker boxes can use wider spacing and fewer modules per square meter, while thinner builds need tighter pitch to avoid hotspots. The table also lists wattage per m², so you can estimate total power draw and transformer sizing upfront instead of guessing later. Bottom line: you get clean, consistent output across the whole sign face and a tighter bill of materials.
| Light Box Thickness(mm) | Module Spacing(mm) | Installation density(PCS/m²) | Surface illumination(Lux) | Power per square meter(W/㎡) |
| 80 | DX=280, DY=280 | 14 | 4500~5000 | 84 |
| 100 | DX=360, DY=360 | 9 | 1600~1800 | 54 |
| 120 | DX=460, DY=460 | 4 | 1200~1300 | 24 |
| 150 | DX=460, DY=460 | 4 | 1000~1100 | 24 |
6-LED AC110/220V High Voltage LED Sign Module Wiring Diagram & Installation Guide
Note:
1. Maximum cascade connection is 50pcs at AC110V
2. Maximum cascade connection is 100pcs at AC220V
Only one end is allowed to be connected to power; both ends cannot be connected to power
Installation Notes
1. This module uses AC power (AC 220V) directly, no need to buy power supply, easy to install
2. After installation, when the voltage is turned on, do not touch the module with metal or hands
3. It is best to use terminal wiring when connecting to the power supply. Double-terminal power supply is prohibited
4. The outlets at both ends of the module should be waterproofed and leak-proofed
5. A leakage switch or a controller switch (with short circuit protection and overload protection) must be used
6. The installation surface must be flat, clean and dry
7. When installing wiring, it is forbidden to operate with power on
8. Avoid rain and mechanical vibration during transportation
Recommended Applications for 6-LED AC110/220V High Voltage LED Sign Module
1. Medium-Depth Channel Letter Systems
The YS-MB8366/YS-MB8367 6-LED High Voltage Sign Module is designed for 8–15cm illuminated letters, providing a higher-output lighting point for medium-depth channel letter structures. The six-LED layout can help sign manufacturers achieve the required brightness without relying solely on a large number of individual modules.
2. Large Storefront Branding
For storefront names, retail branding and illuminated corporate logos, the 660–720lm module output provides a strong lighting source for larger letter faces. The direct AC architecture can also simplify the power arrangement where many modules are distributed throughout a large sign.
3. High-Visibility Commercial Signs
In busy retail and commercial environments, illuminated signs need sufficient brightness to remain visually prominent. The six-SMD3030 configuration provides a stronger per-module output for advertising graphics, promotional lettering and high-visibility storefront displays.
4. Commercial Building Identification
Packaging & Shipping Information for 6-LED AC110/220V High Voltage LED Sign Module
| Item No. | Qty Per String（PCS） | Quanty(Pack) | Total Qty(Pcs) | Total Weight(Kg) | Quter box size(mm) | ||
| L | W | H | |||||
| YS-MB8366/YS-MB8367 |
10 |
40 |
400 | 20.5 | 520 | 300 | 360 |
Professional 6-LED AC110/220V High Voltage LED Sign Module Manufacturer & Supplier
Founded in 2013, YESUN LED is a Shenzhen-based manufacturer specializing in LED signage and commercial lighting solutions. With 5,000㎡ of automated factory space, dedicated SMT lines, and strict full-process QC, we support OEM/ODM projects for customers in over 100 countries. To learn more about our team, factory, and production capabilities.
Product Certifications & Compliance
Our products comply with international standards including UL, ETL, CE, and RoHS certifications to support different market requirements.
6-LED AC110/220V High Voltage LED Sign Module Quality Control Process
We apply strict quality inspection standards throughout production to ensure stable performance and reliable quality before shipment.
