Features of 12V/24V Square Neon Flex Strip

1. Compact 10x10mm Square Profile

The 10x10mm square silicone profile gives this neon flex strip a compact form for clean light-line installation. Its enclosed shape helps spread the light through the diffuser and keeps the finished edge consistent when fitted to sign frames, cabinets or prepared linear channels. The square section makes the product easy to match with a planned groove.

2. Closely Spaced SMD2835 LEDs

A 120 LEDs/m SMD2835 layout supplies closely spaced light points behind the silicone diffuser. With a 120° beam angle and SDCM ≤5 color tolerance, the strip is designed to produce a steady white-light appearance with fewer visible gaps along the illuminated run. This suits projects that need a stable linear effect rather than separated LED points.

3. 12V and 24V Constant-Voltage Options

Available in 12V and 24V constant-voltage versions, the strip can be matched to different low-voltage lighting layouts. Each roll has a 5 m standard length and a listed 5 m maximum connection length, making it easier to plan the power feed before installation. Select the voltage that matches the project wiring and use a compatible supply.

4. Silicone Construction with IP65 Protection

The silicone construction is specified with anti-yellowing and high-temperature resistance for normal lighting use. IP65 protection and a working temperature range of -25°C to +60°C allow the strip to be considered for suitable semi-outdoor projects when all connections and exposed ends are sealed. Evaluate the rating with the complete installation method.

 

12V/24V Square Neon Flex Strip Dimensions(mm)

 

12V/24V Square Neon Flex Strip Wiring Diagram & Installation Guide

 

Installation Steps for 12V/24V Square Neon Flex Strip

1. Measure and Cut at the Marked Line
Measure the required installation length of the square neon flex strip, then cut it only along the printed cutting mark. Do not cut between the marked sections, as this may damage the internal circuit.

2. Solder the Correct Power Wires
Identify the red wire as positive (+) and the black wire as negative (-). Solder both wires to the corresponding PCB pads, making sure that the polarity is correct before applying power.

3. Seal the Open End and Fit the End Cap
Apply suitable sealant to the open end of the neon flex strip. Insert the end cap in the direction shown by the arrow and press it firmly into position to help protect the exposed section.

4. Position and Secure the Mounting Clips
Place the fixing clips along the planned installation line. Adjust their spacing according to the shape of the project, then use screws and a screwdriver to secure each clip firmly to the mounting surface.

5. Press the Strip into the Fixed Clips
Keep the light-emitting side facing upward and press the strip body fully into the mounting clips. Make sure the strip remains straight and that its upper surface stays parallel with the top edge of each clip.

6. Connect the Strip and Protect the Terminals
After the strip has been installed, connect it to the compatible power output. Before switching on the system, insulate the terminals and open ends, and apply suitable protection against short circuits and corrosion.

 

Precautions for 12V/24V Square Neon Flex Strip

   

1. Do Not Bend the Strip Sideways
Do not bend the square neon flex strip in the lateral direction. Sideways bending can place stress on the internal circuit and may affect the strip’s shape, light output or electrical connection.

2. Do Not Twist the Neon Flex Strip
Keep the strip flat and aligned during installation. Twisting the body can deform the silicone profile, disturb the internal LED arrangement and prevent the strip from sitting correctly inside the mounting clips.

3. Do Not Wrap It Around Objects Smaller Than 50 mm in Diameter
Avoid wrapping the strip around any object with a diameter below 50 mm. Maintain a bending diameter of at least 50 mm to reduce mechanical stress and preserve the square profile during installation.

 

Recommended Applications for 12V/24V Square Neon Flex Strip

1. Sign Frames and Illuminated Lettering

Use the square neon flex strip to outline sign frames, illuminated lettering and logo structures that need a clean, continuous light edge. The compact profile fits prepared channels and supports a controlled white-light appearance across signage layouts used in shops, hospitality spaces and commercial interiors. It suits projects where the light line stays clear around the sign.

2. Cabinet and Display Lighting

Around cabinets, display racks and product showcases, this 10x10mm neon flex profile adds a visible light border without taking up the space of a rigid fixture. It works well for shelves, counters and retail displays where the lighting needs to follow a straight or gently curved edge. The low-voltage format suits interior displays with concealed wiring.

3. Architectural Contour and Cove Lighting

 

Packaging & Shipping Information for 12V/24V Square Neon Flex Strip

Item No.	Qty Per Roll（m）	Qty Per Carton(m)	Total Weight(KG)		Dimension of outer carton（mm）
					Length	Width	Height
BS-FN02835A-X120-1 BS-FN02835C-X120-1	5	100	12		384	295	300
Accessories					1M Tube with 2pcs Clips + 2pcs end cap (Head and Tail)

 

Professional 12V/24V Square Neon Flex Strip Manufacturer & Supplier

Founded in 2013, YESUN LED is a Shenzhen-based manufacturer specializing in LED signage and commercial lighting solutions. With 5,000㎡ of automated factory space, dedicated SMT lines, and strict full-process QC, we support OEM/ODM projects for customers in over 100 countries. To learn more about our team, factory, and production capabilities.

 

Product Certifications & Compliance

Our products comply with international standards including UL, ETL, CE, and RoHS certifications to support different market requirements.

12V/24V Square Neon Flex Strip Quality Control Process

We apply strict quality inspection standards throughout production to ensure stable performance and reliable quality before shipment.